User's Manual

VCU Unit Installation and Provisioning
Dual-Band MobileAccessVE Instant Coverage Solution User Manual 22
3. Connect the Slave VCU VAP ports to the patch-panel that feeds the existing structured CAT-
5e/6 cabling system.
4. According to VAPs layout plan (as explained in section 3.4.2) connect the Ethernet switch
cables (see section 4.3.1 for more detailed explanation).
 If the requested jack is already in use, disconnect it from the Ethernet switch and re-
connect it to the corresponding Ethernet port in the Slave VCU front panel.
4.3.1 Connections of VAP Ethernet Cables
For VAPs installed on currently ACTIVE Ethernet ports, shift the relevant Ethernet LAN
connections as follows.