User's Manual

VCU Unit Installation and Provisioning
Dual-Band MobileAccessVE Instant Coverage Solution User Manual 20
A Major Alarm is generated when there is an alarm condition in one or more VCUs, while a Minor
Alarm is generated when there is an alarm condition in one or more of the VAPs.
Note: If only one alarm is required (Minor or Major) an external connection of a wire jumper
between pins 8 and 13 is necessary (normally closed).
Connect the relevant alarms according to the connector pinout below.
Table 9. Alarms Connector – used pins
8 – Major Error Signal (normally closed)
7 – Minor Error Signal (normally open)
11 – Major COM
12 – Minor COM
15 –Major Error Signal (normally open)
13 – Minor Error Signal (normally closed)
11
15
8
Major Alarm
12
7
13
Minor Alarm