User's Manual

Overview
Dual-Band MobileAccessVE Instant Coverage Solution User Manual 8
The following figure shows the desktop VAP rear side and the underside view with the CAT-5e/6
patch-cord cable.
Figure 1-7. VE Access Pod-Rear
1.2.2.1 VAP Antenna Options
Two antenna options are available for VAPs:
 Integral internal antennas
 Connectors that interfaces to external antennas for special coverage requirements.
Note: By default, the VAP is set to transmit through the integrated internal antennas. To use the
external antennas connectors, select the “External Antenna” option in VAP Config-Service RF tab
of the VE Web GUI application (see 7.3).
RJ-45 Connector
to VCU
RJ-45 Connector to
LAN terminal (e.g.
computer)