User's Manual

Troubleshooting
Dual Band EnCOVER VE™ Instant Coverage Solution User Manual 50
7 Troubleshooting
7.1 Finding a Specific VAP in the Building
It is recommended to assign each VAP an identifiable name corresponding to its physical location
as explained in section
5.3. If a name was not configured, or for some other reason a specific
VAP cannot be physically located, physically identify the VAP by following the instructions given
in the following example.
To locate a VAP
1. Click the Config tab from the main menu bar and select the VAP to be located from the
topology tree.
2. Click the Module Info sub-tab.
Selected VAP
Identify On/Off