User's Manual

EnCOVER VE™ Access Pod (VAP) Installation and Commissioning
Dual Band EnCOVER VE™ Instant Coverage Solution User Manual 38
5. Assign each VAP a name as follows:
• Click the Modify button.
• Click OK.
6. When required to transmit the RF signal through a connected external antenna (if VAP
model supports this option):
• Refer to the Service 1 and/or Service 2 tabs
• Enable the External Antenna option
Note: If the external antenna option is not enabled, the signal is transmitted via the
integrated internal antenna, by default.
7. Verify the system connections according to the following section ( 6 ).