Manualshelf

User's Manual

ManualsBrandsCorning Optical Communication Wireless ManualsElectronicsEnCOVER VE CELL-PCS SYSTEM
41424344454647484950
EnCOVER VE™ Access Pod (VAP) Installation and Commissioning
Dual Band EnCOVER VE™ Instant Coverage Solution User Manual 37
Each VAP has a default name of the form VAP Px-name where:
• Px – Number of Slave VCU port to which the VAP is connected
• name - User-defined name
3. In the Network Topology Tree, under the Control Unit, verify that a GREEN (or RED) circle is
displayed for each connected VAP.
• If a VAP is
not
green, select the VAP from the network topology tree then select the
Config tab. Refer to the Alarms tab work area. The alarms for the selected VAP are
displayed.
Note: For more information, on the VAP Alarms, see section Error! Reference source not
found..
4. Refer to the Config Module info tab.
Connected VAP