User's Manual

VCU Unit Installation and Configuration
Dual Band EnCOVER VE™ Instant Coverage Solution User Manual 29
• Type the unit name (up to 20 alpha-numeric characters) in the Controller Name dialog and
click OK.
10. Set the RF parameters for each connected service (up to two). Each service
(Service1/Service2) is configured through its’ corresponding tab. To configure the service RF
parameters:
• Select the Service tab (Service1/Service2) of the service to be configured.
• Click Modify and enter the DL central frequency (first carrier) for each service according to
the following ranges:
• EGSM:
925 – 960 MHz
• UMTS:
2110 – 2170 MHz
• PCS:
1930 – 1990 MHz
• CELL: 869 89 MHz
• DCS: 1805 – 1880 MHz