User's Manual

VCU Unit Installation and Configuration
Dual Band EnCOVER VE™ Instant Coverage Solution User Manual 27
5. Click the Modify button to define the STATIC IP Address according to existing LAN.
Note: After the initial IP configuration, the Master VCU can be accessed remotely via
Ethernet.
• Set the following available parameters:
• DHCP - Dynamic Host Configuration Protocol (N/A)
• IP address - Static IP address
Default definitions:
• The Default IP Address : 192.168.1.1
• The Default Subnet Mask: 255.255.0.0
• The Default Gateway: 192.168.254.254
• Click OK.
6. Log out and then log in again with the new IP settings.
7. Select the Config tab in the main menu bar.