User's Manual

Mounting I P/N 709C011101 I Page 20
3. Optional – mount the SCU-F unit on to the QX chassis:
• Remove the QX side rack ears (pre-assembled) to access the holes required for
assembling SCU-F
• Secure each SCU-F bracket to the side of the QX chassis using the six (6) supplied
screws, as shown in Figure
3-11.
SCU-F to QX Assembly for Wall mount
Installation
Figure 3-11
4. Mount the assembly on the wall using one (or both) of the mounting options - hang the QX
on the anchors (previously prepared in wall) and/or secure to wall using the three (3)
additional holes (screws not supplied).
Horizontal Wall Mount Bracket
Assembly – Rear View
Figure 3-12
Note: When mounted on the wall, there will be approximately 60mm (2.36”) of space between the wall
and the back of the QX unit.