User's Manual

Mounting I P/N 709C011101 I Page 19
3.4.2.1 QX Horizontal Wall Mount Installation
To mount the QX horizontally on the wall
1. Mark and drill the installation holes in the wall, using the bracket as a guide. There are two
options, as shown in Figure
3-9:
• Holes A1 and A2 are used for securing the brackets to the wall in a fixed position
• Holes B2, B2 and B3 are used for hanging the assembly on anchors
QX Horizontal Wall Mount Bracket Holes Figure 3-9
2. Assemble the brackets on to the QX unit by securing each bracket to the side of the QX
chassis using (6) 6-32X5/16' Flat Head 100', Phillips screws (supplied) as shown in Figure
3-10.
Horizontal Wall Mount Bracket
Assembly
Figure 3-10