User's Manual
ModuLite™ Installation Guide APPENDIX A: LINK MEASUREMENTS FORM
Foxcom Wireless Confidential and Proprietary Information
Document No. 43-93-005-05 X1 63
Appendix A: Link Measurements Form
To smoothly carry out link measurements, use the table that appears below. All relevant
parameters are listed. This table aids system evaluation and provides necessary feedback to
Foxcom Wireless.
The following issues should be taken into account:
• Measure the optical power for every link with an optical meter and light source, according
to the number of links or MRC’s.
• Measure the typical signal strength (RSSI) for every installed antenna.
• Check coax cable connection between MRC and every installed antenna.
Table 11: Link Measurement Table
System
Link
Power
Meter
(mW)
RSSI (dBm)
Coax Cable (OK/Fail)
Ant1 Ant2 Ant3 Ant4 Ant1 Ant2 Ant3 Ant4
MRC1
MRC2
MRC3
MRC4
•
•
•
•
•
•
Return this form to Foxcom Wireless (fax: 972-8-918-3844).