User's Manual

ModuLite™ Installation Guide POWER SUPPLY FOR MODULITE™
Foxcom Wireless Confidential and Proprietary Information
Document No. 43-93-005-05 X1 49
7. Power Supply for ModuLite™
The power supplies to drive the ModuLite™ can be purchased from Foxcom Wireless. The
power supplies will be installed into a rack or mounted on a wall and will provide power for both
the Modular Base Units and Modular Remote Cabinets.
The example below (Figure 29) depicts a ModuLite™ system consisting of CDMA800,
GSM1800, and GSM Dual Band, with 500W/ 48VDC AC/DC converters providing power for a
total of 1.5A per unit.
Between the AC/DC converters and the units, a circuit breaker (maximum 10A) must be
installed, either in the AC/DC converter or nearby.
Figure 29: Example - DC Power Supply in High Rise Installation
AC/DC
2
AC/DC
3
AC/DC
6
MRC 32
AC/DC
1
MBU 1 MBU 4
48VDC
48VDC
48VDC
48VDC
BASE
STATION
2.5mm
2
110/220
VAC
110/220
VAC
110/220
VAC
110/220
VAC
MRC 26
MRC 13
MRC 7
MRC 6
MRC 1
16mm
2
2.5mm
2
2.5mm
2
16mm
2
2.5mm
2
16mm
2
Clamping
Connector
Fuse Fuse
Fuse
Fuse
10A
10A
10A
10A