User's Manual

ModuLite™ Installation Guide INSTALLATION
Foxcom Wireless Confidential and Proprietary Information
Document No. 43-93-005-05 X1 37
4.9. High Rise Installation
In a high-rise installation, all MBU’s are placed in the same location. The MBU’s are connected to
the BTS/RBS (see BTS/RBS connection page 44). An MRC can be located on every floor
according to the RF design. The fiber optic cable runs from the MBU to every floor and terminates
at the splice box located on every three floors of the building. Normally, every splice box connects
three MBU’s. From the splice box, the fiber optic jumpers connect to the associated MRC. From
each MRC, a coax cable delivers the signal to the antenna.
MRC
MBUs
MBUs
Figure 18: High Rise Installation