Manualshelf

User's Manual

ManualsBrandsCorning Optical Communication Wireless ManualsElectronicsWLAN In-Building Access Point Amplifier
31323334353637383940
ModuLite Installation Guide INSTALLATION
Foxcom Wireless Confidential and Proprietary Information
Document No. 43-93-005-05 y 28
Figure 16: Procedure for Mounting on a Wall
4.7. Rackmount Installation
For a rackmount installation, attach the MRC to the rack using the rackmount brackets (see Figure
16). The MRC should be hung in the lower section of the rack. Use 12 mm M6 screws.
The MRC requires a clearance of 10 cm above the unit. If a heating source is installed beneath the
MRC, a buffer must be placed between the MRC and the surface.
For MBU rackmount installation, see Figure 3. Use 12 mm M6 screws.
Wallmount brackets
–
not necessary for
rackmount
installation
Rackmount brackets–
not necessary for
wallmount installation