User's Manual

ModuLiteā„¢ Installation Guide INSTALLATION
Foxcom Wireless Confidential and Proprietary Information
Document No. 43-93-005-05 X1 27
4. Remove the three screws from the anchors in the holes designated in Figure 15 for the
mounting bracket. In the other four anchors loosen but do not remove the screws.
5. Using the screws removed from the mounting bracket anchors, attach the mounting bracket
through the three holes.
6. Insert the mounting bracket attached to the rear of the MRC into the mounting bracket
attached to the wall while maneuvering the four wallmount brackets into the four screws
previously loosened but not removed. Do not tighten these four screws so that the MRC
can be removed without requiring any tools.
Figure 15: Wallmount Template
Three holes
for
mounting
bracket