User's Manual

ModuLite Installation Guide INTRODUCTION TO THE MODULITE™
Foxcom Wireless Confidential and Proprietary Information
Document No. 43-93-005-05 y 12
Upgradeable to include more than eight services per Modular Remote Cabinet (MRC),
including 3G technologies
Eliminates RF interferences occurring in parallel infrastructures due to cross antenna
coupling
Minimal input power to ModuLite™ (~0dBm) - No need for high power BTS/RBS, less
expenses for the operators.
MCU-Alarm Interface with open collector and dry contact alarms the alarm loopback is
activated when there is a broken or faulty optical fiber or no power in system.
Low attenuation: Singlemode fiber optic cables have virtually no attenuation (0.38dB/Km),
relieving the need to install amplifiers or any other signal enhancing in-line devices. This
factor alone greatly reduces the engineering.
2.3. Product Drawings
The following drawings show sample front and rear panels of the ModuLite™ units.
2.3.1. Modular Base Unit- Four Ports
1
9
1
U
1
2
Figure 3: Modular Base Unit 4 Ports
Figure 4: ModuLite™ Base 4 Unit Front Panels
2
1
3
4
5
MBU
MBU
Holes for
rackmount
installation
Holes for
rackmount
installation