User's Manual
ModuLite Installation Guide FRONT CHAPTER
Foxcom Wireless Confidential and Proprietary Information
Document No. 43-93-005-05 y
6
1.5.2. Equipment Safety
To avoid damaging your product, please observe the following:
1. Always keep the optical connector covered. Use the fiber optic cable or a protective cover. Do
not allow any dirt and/or foreign material to get on the optical connector bulkheads.
2. The optical fiber jumper cable bend radius is 3 cm. Smaller radii can cause excessive optical
loss and/or fiber breakage.
1.5.3. System Performance
!
Warning
FOR PROPER SYSTEM PERFORMANCE USE ONLY CABLES EQUIPPED WITH
SC/APC CONNECTORS TO CONNECT TO THE FOXCOM WIRELESS MODULITE™
SYSTEM.
1.5.4. Power Supply
! Warning
DISCONNECT BOTH POWER SOURCES BEFORE SERVICING.
CAUTION
______________________________________________
______________________________________________
________________
FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH
SAME TYPE AND RATINGS OF FUSES.
SC/APC Connector