User's Manual

1.3. Reporting Defects
The units were inspected before shipment and found to be free of mechanical and
electrical defects.
Examine the units for any damage that may have been caused in transit. If damage is
discovered, file a claim with the freight carrier immediately. Notify Foxcom Wireless as
soon as possible.
Refer to Policy for Warranty and Repair for further details.
Note
Keep all packing material until you have completed the inspection.
1.4. RF Exposure Compliance
!! Warning
TO COMPLY WITH FCC RF EXPOSURE COMPLIANCE REQUIREMENTS,
ANTENNAS USED FOR THIS PRODUCT MUST BE FIXED MOUNTED ON INDOOR
PERMANENT STRUCTURES, PROVIDING A SEPARATION DISTANCE OF AT LEAST
20 CM FROM ALL PERSONS DURING NORMAL OPERATION.
ANTENNAS MUST BE SEPARATED FROM EACH OTHER, ACCORDING TO THE
SPECIFIC FCC STANDARD. FOR MODEL 810/840 ANTENNAS MUST BE MOUNTED
SO THAT THERE IS AT LEAST 2M SEPARATION BETWEEN ANY TWO ANTENNAS
!! Warning
Each individual antenna used for this transmitter must be installed to provide a minimum
separation distance of 20 cm or more from all persons and must not be co-located with
any other antenna for meeting RF exposure requirements.