User's Manual
Troubleshooting
LTE 700 MHz MobileAccessVE Instant Coverage Solution User Manual 77
3. Set Identify to ON. The Activity LED (Blue) on the corresponding Access Pod will start
blinking fast. (You will need to physically locate the VAP to see the blinking LED).
4. Locate the Access Pod.
5. It is advisable to assign it an identifiable name via the Access Pod Module Info tab, as
described in section 5.6 (e.g. floor 3, room 2) and set the Identify field to Off again.
Blue LED (Activity)
Green LED (PWR)