User's Manual

Administrative Operations
LTE 700 MHz MobileAccessVE Instant Coverage Solution User Manual 68
9.2 Retrieving VCU IP Address
The IP Recovery Tool enables viewing and/or changing the VCU IP address.
To Install IP Recovery Tool
1. Install the IP Recovery Tool application, which can be found on the Setup CD, on the
computer to which the VCU is to be connected.
2. Double-click on the Recovery Tool Setup and follow the prompts. Standard installation
procedure.
To Retrieve the VCU IP Address
1. Connect the computer, on which the Recovery Tool is installed, to the VCU RS-232 Console
port located on the rear panel (See Error! Reference source not found.).
2. Run the IP Recovery Tool application from the computer Start menu.
The Connection dialog appears.
3. Select the Comm. Port corresponding to the connection on the computer.
4. Enter the password Eng and click Connect.