User Manual
Table Of Contents
- 1 Introduction to the MA-860 System
- 1.1 About MobileAccess MA-860
- 1.2 System Architecture
- 1.3 Distribution of Services in the MA-860
- 1.4 Installation Configurations
- 1.5 Provisioning and Management
- 1.6 Installation and Configuration Workflow
- 2 Element Descriptions
- 3 Infrastructure Preparation
- 4 Installation
- 5 Power-up and Provisioning the Unit
- 6 Appendix
Appendix
6.3.2 Viewing and Configuring Using a Standard MIB Browser
To view and configure using any standard SNMP manager
NOTE: It is assumed that the IP Address of at least one destination is already defined.
From a computer
configured as a trap destination
(configured to receive the traps), load the
MIB file to the SNMP manager. The following figure shows the MIB tree that includes the loaded
MobileAccess MA 860 file.
Figure
6-6. MIB Tree with Loaded MobileAccess MA 860
MA-860 Installation and Configuration Guide 64