User Manual
Table Of Contents
- 1 Introduction to the MA-860 System
- 1.1 About MobileAccess MA-860
- 1.2 System Architecture
- 1.3 Distribution of Services in the MA-860
- 1.4 Installation Configurations
- 1.5 Provisioning and Management
- 1.6 Installation and Configuration Workflow
- 2 Element Descriptions
- 3 Infrastructure Preparation
- 4 Installation
- 5 Power-up and Provisioning the Unit
- 6 Appendix
Appendix
6.2.2 Assigning Dynamic IP with DHCP
Note: Refer to the previous section for instructions on installing and navigating the required
application.
1. Select the MA860 unit and click the icon Assign IP in the toolbar.
Figure 6-2. Assigning Static IP Address
3. The IP Address Assignment Method window appears.
Figure 6-3. IP Assignment Method Window
4. Select Obtain an IP Address automatically – do NOT select
Assign a specific IP address
.
Then, click Next. The IP Discovery Settings window appears.
MA-860 Installation and Configuration Guide 60