User Manual

Appendix
To disable trap monitoring of irrelevant channels
For irrelevant channel, disable the Trap Select field.
Status color codes
Each status is color codes as follows:
• Green - OK
• RED - Fail
• GREY - Not relevant.
Trap descriptions
Trap Description
Temp RED - temperature is above 60C; otherwise GREEN.
AP a RED – 802.11a port or AP is not detected; otherwise GREEN
AP bg RED – 802.11b/g port or AP is not detected; otherwise GREEN
MA860 ANT RED - WCE not detected; otherwise GREEN.
WCE Antenna RED – antenna connected to WCE is not detected; otherwise GREEN.
DC RED - Antenna disconnected due to detected overcurrent at the corresponding
antenna.
Adjust a RED – 802.11a cable adjustment procedure of channel failed; otherwise GREEN.
Adjust b/g RED – 802.11b cable adjustment procedure of channel failed; otherwise GREEN.
WCE HW RED – WCE hardware failure; otherwise GREEN.
MA-860 Last row in the window.
RED – MA860 over temperature; otherwise GREEN.
6
A
A
p
p
p
p
e
e
n
n
d
d
i
i
x
x
6.1 Adjustment Tab Parameters
This tab is used to:
• Configure the antennas manually and perform auto-discovery of antennas
• Perform cable adjustment for each channel
• View the power level at each antenna port and at each AP port
• Reset the MA-860 unit
MA-860 Installation and Configuration Guide 56