User Manual
Table Of Contents
- 1 Introduction to the MA-860 System
- 1.1 About MobileAccess MA-860
- 1.2 System Architecture
- 1.3 Distribution of Services in the MA-860
- 1.4 Installation Configurations
- 1.5 Provisioning and Management
- 1.6 Installation and Configuration Workflow
- 2 Element Descriptions
- 3 Infrastructure Preparation
- 4 Installation
- 5 Power-up and Provisioning the Unit
- 6 Appendix
Power-up and Provisioning the Unit
Trap descriptions
Trap Description
Temp RED - temperature is above 60C; otherwise GREEN.
AP a RED – 802.11a port or AP is not detected; otherwise GREEN
AP bg RED – 802.11b/g port or AP is not detected; otherwise GREEN
MA860 ANT RED - WCE not detected; otherwise GREEN.
WCE Antenna RED – antenna connected to WCE is not detected; otherwise GREEN.
DC RED - Antenna disconnected due to detected overcurrent or overcurrent
detected a the antenna
Adjust a RED – 802.11a cable adjustment procedure of channel failed.
Adjust b/g RED – 802.11b cable adjustment procedure of channel failed.
WCE HW RED – WCE hardware failure.
MA-860 RED – MA860 temperature over 60 C; GREEN – MA860 normal
temperature
MA-860 Installation and Configuration Guide 50