User Manual
Table Of Contents
- 1 Introduction to the MA-860 System
- 1.1 About MobileAccess MA-860
- 1.2 System Architecture
- 1.3 Distribution of Services in the MA-860
- 1.4 Installation Configurations
- 1.5 Provisioning and Management
- 1.6 Installation and Configuration Workflow
- 2 Element Descriptions
- 3 Infrastructure Preparation
- 4 Installation
- 5 Power-up and Provisioning the Unit
- 6 Appendix
Power-up and Provisioning the Unit
5.9 Monitoring Alarms
To monitor MA860 status
Click the Alarms button in the Main window. The Alarms pane appears. The pane is divided into
four areas corresponding to each channel and a fifth area (MA 860) for the unit as a whole.
Figure 5-4. Alarms Window
To disable trap monitoring of irrelevant channels
For irrelevant channel, disable the Trap Select field.
Status color codes
Each status is color codes as follows:
• Green - OK
• RED - Fail
• GREY - Not relevant.
MA-860 Installation and Configuration Guide 49