User Manual
Table Of Contents
- 1 Introduction to the MA-860 System
- 1.1 About MobileAccess MA-860
- 1.2 System Architecture
- 1.3 Distribution of Services in the MA-860
- 1.4 Installation Configurations
- 1.5 Provisioning and Management
- 1.6 Installation and Configuration Workflow
- 2 Element Descriptions
- 3 Infrastructure Preparation
- 4 Installation
- 5 Power-up and Provisioning the Unit
- 6 Appendix
Power-up and Provisioning the Unit
Table 5-1. MA 860 View Menu Options
Menu Option Description
Installation User definable unit identification parameters and read-only IP
address and MAC address.
Security Password change options.
Control Shows the General, Adjustment and Alarms tab in the bottom
window area.
General Unit identification and version information, and WCE
information for each channel.
Adjustments Unit adjustment pane. Used to calibrate cables.
Alarms Alarm monitoring
5.5 Unit Location and IP
The Installation tab shows user defined information on the unit location, name, etc. and the unit
IP and MAC address.
MA-860 Installation and Configuration Guide 45