User Manual

Power-up and Provisioning the Unit
5.3 Default Login and User Account Levels
You may login to the MA 860 unit through any Web browser or 860 WLAN Engineering GUI. The
available login credentials and default passwords are defined below:
• Operator (oper) – monitoring options only
• Field Engineer (eng) – monitoring and configuration options
• TechSuport – for MA technical personnel only
NOTE: The password is case sensitive – use lower case letters.
5.4 Remote Web Management
Once the system level attributes are defined as in section 5.2, the 860 WLAN module can then
be accessed remotely on the network LAN from any Web Browser by connecting to the IP
Address of the specific MA 860 unit or through any Network Operating Center (NOC) using
SNMP.
Use the Remote Web management options to make configuration changes, adjustments, and to
monitor the unit status.
To login to the MA 860 configuration application
1. Run a Web Browser application (i.e. Internet Explorer).
2. Enter the IP Address of the MA 860 unit. (i.e. h
ttp://192.168.10.127). The Login dialog
appears. The application version is displayed at the top of the window.
Figure 5-1. Login Window
MA-860 Installation and Configuration Guide 43