User Manual
Table Of Contents
- 1 Introduction to the MA-860 System
- 1.1 About MobileAccess MA-860
- 1.2 System Architecture
- 1.3 Distribution of Services in the MA-860
- 1.4 Installation Configurations
- 1.5 Provisioning and Management
- 1.6 Installation and Configuration Workflow
- 2 Element Descriptions
- 3 Infrastructure Preparation
- 4 Installation
- 5 Power-up and Provisioning the Unit
- 6 Appendix
Installation
4.5.4.2 MA-860 Rack Mount
1. Assemble the side brackets as illustrated in Figure 4-5.
2. Assemble the MA-860 module to the supplied bracket using the four screws
and washers.
3. Mount the assembly in the rack using the side brackets.
Figure 4-8. MA-860 to Bracket Installation
4. Connect the RC antenna ports to the SMA connectors on the MA-860 front
panel.
5. Connect the antenna to the MA-860 antenna ports.
MA-860 Installation and Configuration Guide 36