User Manual
Table Of Contents
- 1 Introduction to the MA-860 System
- 1.1 About MobileAccess MA-860
- 1.2 System Architecture
- 1.3 Distribution of Services in the MA-860
- 1.4 Installation Configurations
- 1.5 Provisioning and Management
- 1.6 Installation and Configuration Workflow
- 2 Element Descriptions
- 3 Infrastructure Preparation
- 4 Installation
- 5 Power-up and Provisioning the Unit
- 6 Appendix
Installation
4.5.2 Add-on to an MA 1000 System Installation
In this type of installation, the MA-860 and MA 1000 RHU are assembled together with a
bracket
between them.
NOTE: It is recommended to mount the MA-860 to the wall, and the MA 1000 on top of the MA
860 (with a bracket between them). However, if a previous MA 1000 RHU is present, you may
install the MA-860 on top of the existing MA 1000 RHU (with a bracket between them.)
MA-860 Installation and Configuration Guide 27