User Manual
Table Of Contents
- 1 Introduction to the MA-860 System
- 1.1 About MobileAccess MA-860
- 1.2 System Architecture
- 1.3 Distribution of Services in the MA-860
- 1.4 Installation Configurations
- 1.5 Provisioning and Management
- 1.6 Installation and Configuration Workflow
- 2 Element Descriptions
- 3 Infrastructure Preparation
- 4 Installation
- 5 Power-up and Provisioning the Unit
- 6 Appendix
Introduction to the MA-860 System
1.5 Provisioning and Management
MA-860 supports several interfaces for managing the MobileAccess WLAN solution – Remote,
local, and 3
rd
party application support.
• Web Based Management – MobileAccess has integrated a standards based HTTP GUI
interface within the 860 WLAN module for remote configuration, calibration, and system
provisioning. The MobileAccess supports the following versions or later web browsers:
Microsoft’s Internet Explorer 7.0 and Firefox 2.0.0.
• MA-860 Engineering Tool – Microsoft Windows® application installed on a computer (i.e.
laptop) and used after the system has been installed for initial configuration, calibration and
system provisioning. This is done via a local (RS232 connection) between the computer
running the application and the MA-860 control module. The application is described in
section
5.10)
• 3
rd
Party Application Support – MobileAccess has developed a standards based SNMP
management MIB library version (2c) which will interface with any standard MIB browser or
SNMP based management system, such as, HP OpenView or Tivoli. SNMP-Traps may also
be utilized for alerting and reporting critical network events with the MobileAccess product
suite.
MA-860 Installation and Configuration Guide 8