User Manual
Table Of Contents
- 1 Introduction to the MA-860 System
- 1.1 About MobileAccess MA-860
- 1.2 System Architecture
- 1.3 Distribution of Services in the MA-860
- 1.4 Installation Configurations
- 1.5 Provisioning and Management
- 1.6 Installation and Configuration Workflow
- 2 Element Descriptions
- 3 Infrastructure Preparation
- 4 Installation
- 5 Power-up and Provisioning the Unit
- 6 Appendix
Introduction to the MA-860 System
1.4 Installation Configurations
MA-860 can be installed either as standalone or integrated with other MobileAccess systems:
• Standalone – provides coverage for 802.11a/b/g services only
• Converged with MobileAccess 1000 series RHU (with and without MA 1200 add-on)
• Converged with MobileAccess 2000 system
NOTE: In all installation types, all the signals are converged via the MA-860 and distributed via
the WCE connected between the antenna and the MA-860 antenna ports.
1.4.1 Standalone
In this type of installation architecture, MA-860 WLAN module distributes only 802.11a/b/g
services over the connected antenna infrastructure.
Figure 1-4. MA-860 Standalone Installation Configuration
MA-860 Installation and Configuration Guide 5