User's Manual

Installation

MA-860 Installation and Configuration Guide 28

To assemble an RHU 1000 onto an MA 860

1. Assemble the supplied bracket to the top of the MA-860, where the notched side of the

bracket is towards the rear of the unit. Secure the bracket to the MA-860 unit using the four

supplied screws.

Figure 4-2. MA-860 and Bracket Assembly

2. Mount the MA-860 and bracket assembly to the wall. When mounting, consider the

following:

• The type of screws used to mount the unit must suit the type of wall construction

(cement, bricks, etc.) so that the mount is secure.

• The position of the APs and required cable connections.

3. Mount the MA 1000 RHU to the bracket using the four provided screws.

Two screws