User's Manual

Power-up and Provisioning the Unit
MA-860 Installation and Configuration Guide 47
5.7 Web Access Adjustment
The default gain for each channel is set to 0dB.
To adjust the gain
1. Click the Adjustment button in the Main window.
The window is divided areas corresponding to each channel. Four control buttons are
available:
• Full Discovery – performs complete discovery of the antennas
• Partial Discovery – performs discovery on new or undiscovered elements
• Reset – sets adjustment values to the factory default levels
• Apply – downloads configuration and adjustment values to the MA860 unit
Figure 5-3. Gain Setting Options
NOTE: The Full Discovery button checks for each and every antenna. During Full
Discovery, the unit DOES NOT transmit or receive data. To discover changes from the last
Discovery, click the Partial Discovery button. Partial Discovery does not affect the unit
output..
2. In the DC field of each channel to which an antenna is connected, verify
that the DC parameter is ON. (This field is enabled by default).
Gain Setting
options