User's Manual
Table Of Contents
- Preface Material
- Product Certifications
- Company Certification
- Introduction to the MA-860 System
- Element Descriptions
- Infrastructure Preparation
- Installation
- Power-up and Provisioning the Unit
- Appendix
Appendix
MA-860 Installation and Configuration Guide 50
6.1.2.3 Assigning a Static IP Address
NOTE: This procedure requires the MAC address of the MA 850A, which is found on the label
located at the rear of the unit.
Perform the following procedure for each of the MA 850A units listed in the Lantronix
DeviceInstaller main window which are to be manually assigned IP Addresses.
1. Select the MA 850A unit and click the icon Assign IP in the toolbar.
Figure 6-2. Assigning Static IP Address
The Device Identification window appears, showing the MAC address of the selected MA
850A unit.
Figure 6-3. MAC Address