User's Manual
Table Of Contents
- Preface Material
- Product Certifications
- Company Certification
- Introduction to the MA-860 System
- Element Descriptions
- Infrastructure Preparation
- Installation
- Power-up and Provisioning the Unit
- Appendix
Power-up and Provisioning the Unit
MA-860 Installation and Configuration Guide 38
To disable trap monitoring of irrelevant channels
For irrelevant channel, disable the Trap Select field.
Status color codes
Each status is color codes as follows:
• Green - OK
• RED - Fail
• GREY - Option disabled (i.e. Antenna Protect in the example below)
Trap descriptions
Trap Description
Temp
AP.11a Connection status of 802.11a Access Points.
AP.11bg Connection status of AP 802.11bg Access Points.
Ant Connect Discovered antennas.
Ant Prot Ant Protection Status[MP12]
Calib.11a Calibration status of the corresponding cable adjustment procedure.
Calib.11b/g Calibration status of the corresponding cable adjustment procedure.
MA-860 Last row in the window. Shows the operational status of the MA-860
unit.
5.2.3 What next?
The unit is factory set for DHCP. It can now be remotely accessed for any additional
configuration procedures or for monitoring by entering the DHCP assigned address from any
Web browser. Refer to section
[MP13]
Note: For networks without DHCP – Assigning a Static IP Address, according to page 50.