User's Manual
Table Of Contents
- Preface Material
- Product Certifications
- Company Certification
- Introduction to the MA-860 System
- Element Descriptions
- Infrastructure Preparation
- Installation
- Power-up and Provisioning the Unit
- Appendix
Power-up and Provisioning the Unit
MA-860 Installation and Configuration Guide 35
5.2.1 MA-860 Configuration Tool Window Description
The MA-860 Configuration Tool window is invoked according to the instructions in the previous
section. The window enables configuring and monitoring the MA-860 controller unit and active
antennas. The window provides four tabs:
• General – displayed by default. This is a read-only tab that summarizes the HW and SW
versions of the system and identification information of the system elements.
• Advanced – contains basic configuration and calibration options four identical groups of
parameters corresponding to each link path. This tab also provides antenna discovery and
MA-860 device reset options.
• Alarms – used to show the status (normal or faulty) of each port.
• TechSupport – two tabs for MA service personnel.
A description of each tab is given after the figure.
Figure 5-1. MA-860 Configuration Tool Main window