User's Manual
Table Of Contents
- Preface Material
- Product Certifications
- Company Certification
- Introduction to the MA-860 System
- Element Descriptions
- Infrastructure Preparation
- Installation
- Power-up and Provisioning the Unit
- Appendix
Power-up and Provisioning the Unit
MA-860 Installation and Configuration Guide 33
5.2 Local Provisioning
This procedure is performed via a local connection to a computer running the MA-860
Configuration Tool application.
To access the MA-860 control unit using the Configuration Tool
1. Install the MA-860 MA Configuration Tool application on your computer.
2. Connect to the MA-860 front panel Local connector using the RS232 9-pin cable provided
with the MA-860 unit.
Note: Before connecting the MA-860 Configuration Tool, verify that the RUN LED flickers green,
indicating that the antenna discovery process is complete (duration of one or two minutes after
power is applied to the unit). Otherwise, a Communication Error may be displayed. If that
happens, wait a minute or two for the discovery to be completed.
RS232
Computer running MA-860
Configuration Tool