User's Manual

Installation
MA-860 Installation and Configuration Guide 29
4.6 Add-on to an MA 2000 System
MA-860 may be integrated into the MA 2000 system using one of the following installations:
• Installing it directly on the MA 2000 RC top panel (using the supplied plate);
• Mounting it on a rack (using the supplied plate);
• Wall-mount near the MA 2000 cabinet.
NOTE: The coax outputs of the cabinet are connected to the appropriate ports on the MA-860
and the antennas are connected directly to the MA-860 module.
4.6.1 MA-860 RC 2000 Assembly
1. Assemble two side brackets to the plate sides as illustrated in Figure 4-6.
2. Assemble the MA-860 module to the supplied bracket using the four screws and washers as
illustrated below.
Figure 4-6. MA-860 Rack Installation
3. Assemble the plate to the MA 2000 RC by securing the brackets to the cabinet sides as
illustrated below.
Side bracke
t
assembly
Connections to Remote
Cabinet antenna ports
Connections to
antennas
Side bracke
t
assembly