User's Manual
Table Of Contents
- Preface Material
- Product Certifications
- Company Certification
- Introduction to the MA-860 System
- Element Descriptions
- Infrastructure Preparation
- Installation
- Power-up and Provisioning the Unit
- Appendix
Installation
MA-860 Installation and Configuration Guide 23
NOTE: It is recommended to mount the MA-860 to the wall, and the MA 1000 on top of the MA
860 (with a bracket between them). However, if a previous MA 1000 RHU is present, you may
install the MA-860 on top of the existing MA 1000 RHU (with a bracket between them.
[MP10])
To assemble an RHU 1000 onto an MA 860
1. Assemble the supplied bracket to the top of the MA-860, where the notched side of the
bracket is towards the rear of the unit. Secure the bracket to the MA-860 unit using the four
supplied screws.
Figure 4-3. MA-860 and Bracket Assembly
T
wo screws
T
wo screws