User's Manual
Table Of Contents
- Preface Material
- Product Certifications
- Company Certification
- Introduction to the MA-860 System
- Element Descriptions
- Infrastructure Preparation
- Installation
- Power-up and Provisioning the Unit
- Appendix
Introduction to the MA-860 System
MA-860 Installation and Configuration Guide 5
1.4 Installation Configurations
MA-860 can be installed in the following configurations:
• Standalone – to provide coverage for 802.11a/b/g services only
• Add-on to a MobileAccess 1000 series RHU (with and without MA 1200 add-on)
• Add-on to MobileAccess 2000 system
NOTE: In all installation types, all the signals are converged via the MA-860 and distributed via
the WCE antennas connected to the MA-860 antenna ports.
1.4.1 Standalone
In this type of installation configuration, MA-860 distributes only 802.11a/b/g services over the
connected antenna infrastructure.
MA 860
802.11a/b/g AP
802.11a/b/g AP
802.11a/b/g AP
802.11a/b/g AP
Passive Antennas
and WCEs
WCE
Figure 1-4. MA-860 Standalone Installation Configuration