Manualshelf

User's Manual

ManualsBrandsCorning Optical Communication Wireless ManualsElectronicsIn Building RF Distribution System
31323334353637383940
Local Configuration and Monitoring
MA 850 Installation and Configuration Guide 26
4.1 Local Configuration and Monitoring
This procedure is performed through the MA 850 Customer Tool application installed and
launched from a computer that is locally connected to the MA 850 unit.
For professional installer only
This procedure is performed through the MA 850 Customer Tool application installed and
launched from a computer that is locally connected to the MA 850 unit.
4.1.1 Getting Started
1. Install the 850 MA Customer Tool application on your computer.
2. Locally connect to the MA 850 Local connector using the RS232 9-pin cable provided with
the MA 850 unit.
3. Launch the application on the computer. The MA 850 Customer Tool dialog appears.
Figure 4-1. Connecting to the MA 850
4. Under Serial Port, Select the com port corresponding to the currently connected computer
RS232 port and click Connect. The dialog options are described in the following sections.
Set Comm port
Connect