User's Manual

Add-on to an MA 2000 System
MA 850 Installation and Configuration Guide 22
3.6 Add-on to an MA 2000 System
MA 850 may be integrated into the MA 2000 system using one of the following installations:
• Installing it directly on the MA 2000 RC top panel (using the supplied plate);
• Mounting it on a rack (using the supplied plate);
• Wall-mount near the MA 2000 cabinet.
NOTE: The coax outputs of the cabinet are connected to the appropriate ports on the MA 850
and the antennas are connected directly to the MA 850 module.
3.6.1 MA 850 RC 2000 Assembly
1. Assemble two side brackets to the plate sides as illustrated in Figure 3-4.
2. Assemble the MA 850 module to the supplied bracket using the four screws and washers as
illustrated below.
Figure 3-4. MA 850 Rack Installation
3. Assemble the plate to the MA 2000 RC by securing the brackets to the cabinet sides as
illustrated below.
Side bracket
assembly
Side bracket
assembly