User's Manual

MA 850 Front and Rear Panels

MA 850 Installation and Configuration Guide 4

1.2.2 Rear Panel Port Connections and LEDs

The rear panel contains the 802.11b/g AP connections, Ethernet connection for remote

management and antenna sensing connector.

Figure 1-3. MobileAccess 850 Rear View

Rear Panel Ports

The following table describes the rear panel ports.

Rear Panel Ports Description

802.11b/g APs

Four 802.11b/g connections. (See LED descriptions in the

following table).

NOTE: To be terminated with 50 ohm terminations when not in use.

Connection to

control

Relevant only when installed as part of a MA 1000 system.

Connects to RHU 1000 rear panel Control connector. Routes the

antenna sensing (indication of whether antenna is present) to the

RHU for monitoring via the management application. (RHU

Version 3.1 and higher).

Ethernet port

Connection to network for configuration and management

through a WEB browser.

The default IP Address is on the label

near the port.

Rear Panel 802.11 b/g AP LEDs

The rear panel LEDs indicate connection point of corresponding 802.11b/g AP.

Rear Panel LEDs Description

Blinking green AP connected and working.

Red Corresponding AP is not connected or does not transmit.

Ethernet

port

Antenna sense

connection

802.11b/g AP connectio

MAC

Address