User's Manual

System Installation
2000 Lite Installation and Connections
MA 2000 Installation and Configuration Guide 56
4.4.2 Antenna Connections
Referring to Figure 4-12:
• Connect the four cables that are routed from the 8x4 Combiner to either side of the 2000
Lite, to the antenna ports of each RU.
• Connect the two cables that are routed from the Digital unit to either side of the 2000 Lite,
to the RS232 front panel connector of each RU.
The following figure shows the internal connections ports.
Figure 4-13. Side View of the Open MA 2000 without the Cables
NOTE: All the required RU 2000 connections are described in section
2.2.1.
• Connect the antennas to the MA 2000 Lite antenna ports.
Connection to RU front
panel RS232 port
Connection to RU front
panel RS232 port
Connection to 4x8
combiner port