User's Manual

System Installation
2000 Lite Installation and Connections
MA 2000 Installation and Configuration Guide 54
4.4 2000 Lite Installation and Connections
MA 2000 is designed as a wall-mount installation – usually located in the communication shaft of
the corresponding floor. The remote units are mounted externally to the 2000 Lite device and
their antenna outputs are connected to either side of the 2000 Lite device. The combined
outputs are then connected to the antennas in the covered area.
The following figure illustrates MA 2000 connections to two RUs.
Figure 4-11. 2000 Lite System coax connections
MA 2000 Lite (filter and
combiner enclosure)
RU 2000
Antenna connections
RU 2000