Spec Sheet

ManualsBrandsCorning Optical Communication Wireless ManualsElectronicsIn-Building RF Distribution Sytem

DS-2000 Rev 2.7

Features

• Support for remote monitoring through MA 410/430

controllers

• Scalable and future-safe – additional remote units

can easily be installed

• All active components are located in the

communication closet/room

BTS 3

BTS 2

BTS 1

BTS 2

BTS 1

RIU 2

MA 410

RIU 1

MA 430

Base Unit

RU 2000

Add-on

RU 2000

Add-on

RU 2000

Remote Cabinet 1

Remote Cabinet 8

Remote Monitoring

BU Servicing up to

eight remote

locations

Antennas distributing

all services in the

remote locutions

Antennas distributing

all services in the

remote locutions

MobileAccess 2000

mobileaccess

Networks

Providing converged wireless coverage solutions

MobileAccess™ 2000 converged wireless networks solution provides scalable

in-building coverage for multiple wireless data and voice services through a single

coax and broadband antenna infrastructure. The solution is based on two main

elements that are interconnected via fiber optic cable:

• Remote Cabinets - distributed over remote sites, the remote cabinets

interface to the coax antenna infrastructure. Each cabinet can house up to five

Remote Units (RUs) 2000 corresponding to the covered services. MA 2000 Lite

provides single operator entry level support.

• Base Units - concentrated in the telecom room, the BUs interface to the RF

signal source, where each BU performs RF to optic conversion for a number

of operator services. Each BU can support up to eight same service RUs.

In addition, Remote Interface Units (RIUs) can be used to provide interface

to the each BTS, and automatically adjust the output signal to respond to

a range of BTS or BDA output power levels.

MA 410/430 controllers can be used for remote monitoring of the system

elements from a single location via advanced intuitive GUI.

• Each Remote Cabinet can support up to 20 multi-

operator services

• Each MA 2000 Lite can support up to 8 services

• All services are distributed through a single coax

and antenna infrastructure

• Support for high-power modules

• Support for all current and future technologies such

as TDMA, CDMA, WCDMA and GSM, and services

such as PCS/CELLULAR, Paging, iDEN and 802.11

(a/b/g) Wireless LAN

Example of MA 2000 system with

remote cabinets supporting up to five

services: two per RU 2000 and an

additional service provided by the Add-

on unit.

A single coax and antenna infrastructure

services each remote location. Each BU

can distribute the signal over up to eight

remote locations

Summary of content (6 pages)

PAGE 1
mobileaccess Networks MobileAccess 2000 Providing converged wireless coverage solutions MobileAccess™ 2000 converged wireless networks solution provides scalable in-building coverage for multiple wireless data and voice services through a single coax and broadband antenna infrastructure. The solution is based on two main elements that are interconnected via fiber optic cable: • Remote Cabinets - distributed over remote sites, the remote cabinets interface to the coax antenna infrastructure.
PAGE 2
PAGE 3
MobileAccess 2000 Supported Services RF Connections TDMA 800/1900 CDMA 800/1800/1900 GSM 900/1800/1900 iDEN 800, SMR 900, Paging 900 WCDMA To RF source (Base Unit and RIU): N-type Female, 50 ohm To antennas: N-type Female, 50 ohm Intermodule: SMA Female, 50 ohm Physical Specification Fiber Optic Specifications Optical output power Max. Optical budget Optical loss per mated-pair connectors: Optical Connector Fiber type Wavelength Maximum distance between Base Unit and Remote Cabinet 1.0mW 3dB 0.
PAGE 4
MobileAccess 2000 Wallmount Cabinet 355.0 [13.98"] 302.0 [11.89"] 459.6 [18.09"] 487.6 [19.20"] 460.0 [18.11"] 349.4 [13.76"] 397.0 [15.63"] Rackmount Cabinet 101.6 [4.0"] 76.2 [3.0"] 355.0 [14.0"] 101.6 [4.0"] 464.0 [18.3"] 482.6 [19.0"] 431.6 [17.0"] 349.4 [13.8"] 397.0 [15.6"] DS-2000 Rev 2.
PAGE 5
PAGE 6