User's Manual
Table Of Contents
- 1 Introduction to the MA 1000 System
- 1.1 About MobileAccess™ 1000
- 1.2 System Architecture
- 1.3 Configuration Options
- 1.4 MA 410/430 Remote Management
- 2 System Elements
- 3 Site Preparation
- 4 System Installation
- 5 Appendix: System Specifications
System Installation
4. For the uplink, connect the fiber optic cable pigtails from splice box from the RHU to the
uplink port that connects to the BU.
5. Connect the power to each RHU according to power design planning.
6. Verify that 50 ohm terminators are placed on the unused uplink and downlink connectors.
4.3.2 MA 1200 Add-on Installation
The following figure provides the dimensions for the 1200 Add-On unit.
Figure 18. 1200 Add-On Dimensions
MA 1000M Installation and Configuration Guide 26