User's Manual

Introduction to the MA 1000 System
• MCT – a Java based GUI application provided with both controllers. The MCT is used
after the installation procedure to adjust MobileAccess devices according to the
installation site characteristics in order to optimize coverage for the site.
The application is installed and ran from a computer that is connected either locally or via
remote dial-up modem to the controller site to be adjusted or monitored.
• MobileAccess Manager™ – a Java based GUI software application that provides
enhanced monitoring and control capabilities for all your
MA 430™ sites from a single
location; each site can consist of a standalone MA 430 controller, or a MA 430 controller
in a Master topology with a number of MA 410 controllers connected as slaves. The
MobileAccess Manager application is not supplied with the controller – it is
purchased
separately.
The MA NMS application is installed on a server and is accessed from any client by connecting to
the server from any Web Browser with enhanced Java VM capabilities.
MA NMS manager provides the following features and capabilities:
• Remote SNMP management from a single location
• Client/server management capability over a TCP/IP network with enhanced monitoring
and control capabilities
• Intuitive GUI that enables end-to-end fault sourcing from RIU to antennas. The GUI
includes:
• System status at a glance through multi-color tree with upward propagation of fault
indications
• Graphical view of system elements including LED status displays and auxiliary
connections
• Multi-color event monitoring display
• RF Connections
MA 1000M Installation and Configuration Guide 6