User's Manual
Table Of Contents
- 1 Introduction to the MA 1000 System
- 1.1 About MobileAccess™ 1000
- 1.2 System Architecture
- 1.3 Configuration Options
- 1.4 MA 410/430 Remote Management
- 2 System Elements
- 3 Site Preparation
- 4 System Installation
- 5 Appendix: System Specifications
Introduction to the MA 1000 System
1.3 Configuration Options
The MobileAccess™ 1000/1200 system includes three basic configuration options:
A) Basic configuration
The Base Unit drives a single or dual band, MobileAccess™ 1000 RHU. The dual band RHU
consists of a low band service (cellular 800, iDEN, Paging, or GSM 900) and a high band
service (PCS 1900 or DCS 1800).
Figure 2. MobileAccess 1000 Basic BU – RHU Configuration
B) Using the MobileAccess 1200 add-on unit to provide an additional service
A MobileAccess™ 1200 add-on unit can be connected to a MA RHU 2000 unit to provide a
third service. The add-on unit can be Cellular, PCS, UMTS, 3G, or any future service.
Figure 3. MobileAccess 1000/1200 BU – RHU Plus Add-On
MA 1000M Installation and Configuration Guide 4