User's Manual
Table Of Contents
- 1 Introduction
- 2 Installation Guidelines
- 3 HX Indoor Physical Installation
- 4 HX Outdoor Physical Installation
- 5 Appendix A: System Specifications
- 6 Appendix B: Ordering Information
- 7 Appendix C: HX Outdoor Non-Standard Connector Descriptions
- 8 Appendix D: Power Cable Specifications
Corning Optical Communications User Manual I CMA-066-AEN I Page 50
4.6.3 Power Connections
The HX Outdoor power connector is model dependant (AC/DC). Each HX Outdoor Remote unit includes a non-standard
power connector which requires the proper wiring. Wiring instructions are provided for both AC and DC models.
4.6.3.1 AC Power Input Model Connections
Note: Refer to Appendix D for the HX OD AC power cable specifications.
Connect the power cable wires according to the wire connection in Table 4-1 and Figure 4-11.
Pin
Wire Color
Function
A Yellow/Green GND
B Blue N
C Brown L
Table 4-1. Wire Connections
Wiring Diagram
Figure 4-11